Advantages And Disadvantages Of Most Common Types Of Floors In Residential Buildings

There are many types of floors in the world of construction, surely many more than I know, but in this article, I want to focus on the most common types of floors in residential buildings.

The way slabs are those who need support in two of their ends, beams to transmit loads wrought through them to the pillars and from there to the foundation.

Unlike in unidirectional slabs, bidirectional slabs do not need support at the ends to transmit the loads, but rather the slab loads are transmitted in both directions, creating a lattice until they reach the pillars through the abacus (then concrete).

Unidirectional Forging Of Joists And Vaults

From this transmission of loads from the slab to the beams, the joists, which are prefabricated concrete elements, with prestressed reinforcement, are supported by the formwork of the beams to concretize together and form a monolithic element.

The joists can be semi-resistant or self-supporting, the difference between them being the ability to withstand loads before being concreted and being integrated into the slab. The semi-resistant ones need a lower shoring until the slab has acquired all its resistance, while the self-supporting ones do not need this shoring because they have sufficient bearing capacity since their placement.

The latter is usually used in sanitary slabs to avoid leaving lost props under the slab (the toilet cannot be accessed to recover the props once concreted)

For the transmission of the loads to be effective towards the beams, it is necessary that there is a connection between the joists and the beams. Sometimes this connection is solved by introducing the joists in the beams, and in others, you can choose to place connectors that join both elements. These connectors are simple corrugated steel rods that are placed in the “kidneys” of the joists and inserted into the beams.

The strength of the slab is based almost entirely on the joists, so that the space between them is hardly relevant in terms of the ability to withstand loads, so it is not necessary that there is complete concrete mass between two joists If so, much of that concrete would not work at all, so it would simply be contributing weight to the structure. This is solved by placing lightening elements supported between two joists so that the part of the floor between joists that do not work that of the lower area is not concrete, but a much lighter element without structural capacity. These elements are the vaults.

The vaults are usually made of concrete, although they can also be used of ceramic or porexpan material (the typical white cork of balls), with which we can further lighten the weight of the slab.

Obviously, all these elements, before becoming part of the already concreted structure, need to rely on the forged formwork to be able to be mounted. The formwork can be of complete planking (the entire surface is a wooden “floor” on which you can walk to work on it by mounting the slab), or it can be partial formwork, in which only the areas of the beams formwork where the joist heads to rest and the vaults rest on them.

Conclusion

These partial formworks save a large amount of formwork wood, but they require working from the lower floor with auxiliary means until a support surface is formed, which must also be protected to avoid falls between the joists.

Read More →


5 Tips To Run Your Construction Work Within Budget

When a work is created, mainly if it is the first time, people actually do not hold a clear understanding of what they are going to view, so it is natural for them to find some shocks not very bright, or be motivated for the thrill of the new project to get out of the traditional budget.

For these reasons, in this article we will try to cover at least some aspects to contemplate to maintain proper control of the construction budget:

Consider terrain difficulties. Several times we acquire land without getting into account if it has the necessary provisions to build. Therefore, before obtaining the area, it is prudent to do a soil study, recognize the unevenness, and get into report other features that could perform the work more costly or require adjustments in the design.

Custom Home BuilderMake sure the budget contemplates the kind and variety of materials you expect. When a building budget is made, usually, the budget artist bases his budget on “standard” elements, except the owner of the work clearly indicates the type of stuff he wishes to use in each case. For instance, your accounts may include plywood wooden doors, while you think that they are solid wood. When purchasing the doors, the variation in expectation of excellence and price will arise! For that purpose, it is advised that the owner of the work clearly demonstrates the quality and type of materials you require and/or guarantee that the statement is evident in terms of the nature and quality of materials it holds.

One thing is work and other associates. Although it seems obvious, many moments when you think about the statement of the work, the different needs that start with it are overlooked, but that does not indeed have to do with the system itself, and with this, we mean for instance the lamps, faucet, even to kitchen and bathroom furniture. In this sense, we must look for an excellent price-quality balance, because what is in fashion is not always the most convenient.

Don’t get too enthusiastic about the notion of ​​”since we are in this.”  Many times, when you are in the method of production, new ideas emerge about something we would like to combine or change in our practice. This is not all wrong since we are on course to do it, but we must not lose vision of the point that every move, added or extra in the form of the work, will probably make it more valuable and will take us out of the budget. We must judge whether the change is significant and if it adds content to work in its functionality.

Hire reliable professionals and experts in Phoenix Arizona Metro Builders LLC. They say that cheap is rare, and this is particularly true when it comes to building. To carry out a constructive project safely and successfully, you should look for the professionals (engineers, architects, and construction company) that will help you to properly manage your work, optimizing the spaces, streamlining resources, and properly managing all the processes.

Read More →


How Much Does It Cost To Develop A Separated Garage?

While it sounds easy enough, it has to do with as simple to respond to as the concern: “Just how much will cars and truck cost?” There is an extraordinary variety of variables that enter into any garage building and construction task, and without specifying those variables, it’s tough to identify the forecasted cost. To put it simply, a separated garage can cost anywhere from $3500 for an easy one vehicle garage as much as $50,000+ for personalized many cars and truck structure.

That being stated, by putting some believed into what specifications and requirements you have actually for your separated garage, you will have the ability to compute with far more precision what it will cost. And this guide is here to help you!

Keep in mind; it’s not simply the cost of the garage itself that ought to be computed. There is a structure that needs to be developed, alternatives that can make a world of difference, and far more.

Pros and Cons of a Separated Garage

It is necessary to weigh all the pros and possible risks of a significant home upgrade before you invest your hard-earned money in it! Here are both some pros and cons of separated garages:

Pros:

With a separated garage, you have far more flexibility to personalize your garage style to the design of your residential or commercial property. Where a connected garage needs to match the style of your existing home, a separated garage can handle a style of its own.

A removed garage can be positioned anywhere residential or commercial property lines, topography, and driveways make it most hassle-free, whereas a connected garage needs to be connected.

It’s a lot easier to consist of a loft or 2nd story in a removed garage without considerably changing the cost of the garage. Whether transformed to a completed living location or just used as a storage area, a loft offers more flexibility to your separated garage, along with additional area. And start, who does not need additional area!

A separated garage keeps unsafe carbon monoxide gas far from your house. While the danger is low with a connected garage, a removed garage offers extra security. Obviously, never ever leave a car idling in any garage!

Cons

Direct exposure to harsh weather conditions. The more your garage is from your door, the more you’ll be strolling in the rain.

Some price quotes put the typical preliminary cost of constructing a separated garage as somewhat greater than developing connected, generally since you are developing four walls rather of 3. There is likewise additional work included in connecting a garage into the home and making sure absolutely nothing leakages.

What is the Cost of a One Car Garage?

The outright tiniest size you need to even think about for separated one car and truck garage is 10′ x16′. This accommodates just little cars and trucks and permits really little additional maneuverability. A width of 14′ to 16′ provides a much-needed area for going into and opening doors or leaving cars.

What is the cost of a 2 Car Garage?

20′ x20′ is the minimum size of two cars and a truck garage anybody needs to think about. A 24′ x24′ garage provides much better versatility and increasing the width to 28,’ and the length to 30′ or more will offer some extra storage area on the sides and back.

Costs of 3 Cars and Truck Garages and Larger

A great guideline is to increase your garage width by a minimum of 12′ or the length by a minimum of 20′ for every single vehicle that is included. There are several possible setups for lorry parking and garage door design, so you will wish to think of what will best match your readily available area.

Costs for a really fundamental 20×30 three cars and truck garage begin around $14,000, and 20×40 four-vehicle garages around $16,900 and increase the previous $60,000.

Cost of a 2 Story Separated Garage in Arizona

There is an extra method to increase your offered area without increasing the footprint of your garage if the area is a problem. Including flooring to your garage increases your alternatives greatly. You might utilize the whole 2nd level for storage, established a workshop or leisure space, or complete it out as a guy cavern or an additional bedroom. The all-time low cost for a 20×20 Legacy 2 Story Garage is around $20,000.

Read More →


Best Kinds of Pipelines for Repiping in Phoenix

You’re most likely want to know what type of pipeline is best for the Arizona location and your needs. Well, numerous piping products are out there; however, in our expert viewpoint, the very best outcomes for repiping Arizona houses consist of:

  1. Copper
  2. PEX

To assist you in choosing the best pipeline for your repiping job, we’ll enter into more information about the four kinds of pipes and discuss how and where they must be used.

How to select the ideal pipeline for your plumbing application 

If you need to repipe your house, the very first thing you’ll wish to do is identify what product you want to use as the replacement pipeline: Copper and PEX.

Keep in mind- you can’t merely select any pipeline product you want. The IRC (International Residential Code) has rigorous constraints on where and how particular pipeline products can be used:

  • PVC is not authorized for usage inside the house other than as drain lines.
  • CPVC is not authorized to be used for the primary drain line. CPVC can break if frozen, which indicates it’s usage as underground piping (i.e., sewage system lines) ought to be restricted and just set up per the producer’s requirements.

Before you select the pipeline product, you desire, find out:

  1. Where the pipeline will lie: inside or beyond the house
  2. What type of pipe it will be: primary water service pipeline, supply pipeline, wastewater (drain) pipeline or the central drain line

Now that you have a much better concept of which piping products you can or can’t use for your task let’s take a better take a look at the qualities of each pipeline.

Copper piping

Can be used for:

  • Hot & cold water supply lines
  • Drain lines
  • Main water service line
  • Main drain line

Pros of copper piping:

  • Incredibly long-lasting (earthquake and fire resistant!).
  • Thin size implies it works well in tight areas.
  • Can extend for long stretches with very little or no assistance.
  • Environmentally-friendly (it’s a naturally happening metal).

Cons of copper piping:

  • Most costly kind of pipeline.
  • Typically establish “pinhole leakages.”
  • Should be thoroughly flushed before usage to eliminate any residue from the soldering procedure.
  • Not as versatile as plastic pipelines.
  • Need to be soldered to other copper pipelines (so the expert you pick need to be knowledgeable in soldering).
  • Some property owners report a metal taste to their water.

PEX piping

Can be used for:

  • Hot & cold water supply lines.
  • Main water service line.

Pros of PEX piping:

  • Affordable piping.
  • Does not wear away.
  • Resistant to acidic water.
  • Withstands freezing much better than copper.
  • Versatile; can make sharp turns without the needment for soldering or utilizing glue.
  • Fewer fittings needed due to versatility.
  • Less possibility of leakages since the single, long term of the pipeline can be used.
  • Quickly fixed on the occasion that leakage does take place.
  • Some PEX makers provide to 25-year minimal guarantee on pipelines if expertly set up.

Cons of PEX piping:

  • Can’t be exposed outside the wall (no direct sunshine), should be set up so that it is covered/protected.

Find the best plumber in Phoenix AZ. for all types of plumbing work and water leaks https://theplumberinc.com

Read More →


The Solar-Ready Roof For Phoenix Arizona Metro Area

Here’s how contractors in Phoenix Arizona Metro area can create a roofing system that will effectively produce electrical power on-site.

There are two elements to the net-zero home energy formula. On the one hand, there’s preservation: Your house requires be creating and constructing to need minimal inputs of energy for heating, cooling, plug, and lighting loads. On the other hand, there’s on-site power generation: No home utilizes absolutely no power, so to reach net no, your house needs to produce a few of its juice utilizing photovoltaic.

In practice, net-zero homes produce surplus energy throughout the summer season when days are long, and the sun is in the best place in the sky, and they take in power from off-site throughout the winter season (and, naturally, in the evening). To reach an excellent balance needs thoughtful factor to consider of home sitting, roofing system slope, roofing orientation, and shading– the essential aspects that identify a house’s viability for on-site generation of power.

Roofing Orientation

Solar panels produce the most power when they’re pointed straight at the sun. To make the most of production, a perfect solar roof in the northern hemisphere, consisting of the U.S., will deal with dead south– solar south, that is, not magnetic south.

Roofing System Slope

The least expensive and easiest method to install solar panels is on a rack in aircraft with the roofing system. In that case, the solar panels’ angle to the sun is the very same as the roofing system’s angle. The most considerable solar output for the year will occur on the days when the sun is shining straight down on the face of the solar panels.

In some cases, you have to accept that solar does not make sense on a job. In a wide-open field, we continuously attempt to orient the roofline as well as a lot of the windows towards the south, and I shoot for roofing pitch of 8/12 to 10/12.”

Celestial south is perfect; as soon as you begin moving east and west of south, you start losing some production and some effectiveness in the system. Non-south-facing roofing’s can still produce a lot of power. If you had a maximum south-facing roofing system, you’d be at 98% production; if you had an east-facing roofing system at a 35-degree pitch, you’d be at 80% production.

Provided the decreasing expense of solar panels, contractors might discover it useful to make up for flaws in roofing system slope or orientation by merely including more groups where area enables. And with the rate of solar panels not the restricting element that it as soon as was, including a couple of solar panels which does not usually break the bank anymore.

The Shading Issue

Shade on the roofing system, on the other hand, can be a substantial problem. We kind of use the window in between 9 AM and 3 PM on south-facing roofing.

We also have a tool that we can go up on the roofing system with, called a Solmetric Sunday which works with Google Earth images and will compute the shading and energy production for the job’s solar range.

Develop With Solar in Mind

For contractors seeking to consist of solar in tasks now or in the future, they continuously have to remember the structural capability of the roofing. As a solar installer, Among the important things we need to do is supply a structural evaluation as we go through the allowing procedure– generally, a letter signed and marked by an engineer stating that the roofing can accommodate the extra loading of the solar.

Another location where insight can be helpful when prepping for solar is a job’s electrical wiring connections. There is continually going to be some secondary devices, and whether it is an inverter that works with your power optimizers or, in the case of micro inverters, you have numerous circuits that get integrated someplace down near your primary electrical panel. There are some additional devices, keeping track of tools and so forth, that goes along with your things on the roofing.

Limitation the number of skylights where you’re preparing to put in solar panels possibly. And prevent putting dormers on the south side of the roofing system. Find a quality roofing contractor in Phoenix AZ

Read More →


Contemporary Design Slips into Conventional Markets in Phoenix Arizona City location

While the brick-front, center hall colonial-style home isn’t disappearing totally whenever quickly, designers and contractors are presenting new functions and modern-day houses into the mix in some unanticipated locations. In some places, such as the Line K collection by K. Hovnanian Residences in the Willowsford neighborhood in Northern Virginia and the Lexington Town at Avondale townhouses by Lexington Residences in Chicago, the houses entirely welcome the modern-day visual. In others, layout and exteriors are fine-tuned to include new aspects in a more transitional design.

Contemporary Outside Functions

While modern components have belonged to upgraded layout for several years, including modern-day design to the beyond a house is a little bolder.

“New townhouses being constructed years back or more looked much like the old single-family houses in Chicago,” states Jeff Benach, principal of Lexington Residences in Chicago. “It resembled Epcot, type of a ‘retro-Chicago’ look duplicated all over. Over a previous couple of years, home builders began creating hyper-contemporary houses, particularly on the Northside.”

The Line K series of houses, developed by globally renowned designer and designer Piet Advantage and constructed by K. Hovnanian, was initially presented in Phoenix.

“It was a leap of faith to bring this house style to Virginia,” states Chandler. “It’s not simply a modern-day function in an existing layout; the style catches a European feel and is in proportion and minimalist. It was likewise an obstacle to provide a two-story house a modern-day feel, to produce an elevation that operates in a various market and to discover a method to generate more outside living in various environments.”

When weather condition allows and closed off throughout winter season, glass pocket doors are utilized to develop an indoor-outdoor living area that can be completely open.

“Among the most popular alternatives amongst purchasers is developing indoor-outdoor fluidity into one big area with moving glass walls,” states Mistry. “This enables individuals to utilize the outdoors as an extension of their living-room and has a California ambiance that’s uncommon in the Mid-Atlantic.”

Contemporary Interior Functions

While the open layout is not brand-new ins single-family houses, getting rid of walls and broadening open area offers a modern-day want to townhouses, states Benach. The completely free fantastic space and center island kitchen area is a trademark of brand-new townhouses at Lexington Heritage and Lexington Pointe in rural Chicago in addition to at Avondale.

Other Brand-New Functions Consist Of:

Upper-Level Living Locations – A popular modern addition to layout is a loft located on the bedroom level that supplies an additional area beyond the basement for grownups or kids to utilize, states Mistry.

They have streamlined cooking areas. Modern kitchen areas have sleek cabinets and tidy lines, with thin drawer pulls, states Benach, instead of offices with moldings and intricate information.

Modern Fireplaces – Direct fireplaces specify modern-day style, states Chandler, since they have a balanced and minimalist design. Contemporary-style direct gas fireplaces are a prevalent aspect that Lexington integrates even into there a little more standard rural townhouses.

Contemporary Restrooms – Instead of a more standard tub set into a platform, Mistry states purchasers are going with a freestanding bathtub or a ‘damp space’ with a big shower and freestanding tub set within a glass enclosure. Drifting vanities, which are wall-mounted above the flooring, likewise offer a contemporary appearance.

Gratitude for modern components and contemporary style can be discovered in all age and amongst individuals in a range of life phases.

Read More →


How to Produce a Spa-Style Restroom

Whether you have seen it on Pinterest, interior decoration blog sites, or perhaps even a contractor’s house listing, one pattern is taking the house style market by storm: the spa-style restroom.

Below given are some tips to discover how to produce a spa-style restroom in your brand-new house in Phoenix Arizona City location:

Specifying The Spa-Style Restroom

To start, it would assist in determining what a spa-style toilet is.

“Spa-style restrooms feel light, airy and open,” states Sean Juneja, CEO of acclaimed New york city City interior decoration company Decoration Help. “They have tidy lines and a modern-day feel.”

Paloma Contreras, a Houston-area National Kitchen Area and Bath Association Expert and interior designer, states a spa-style restroom is not merely stunning. However, it likewise works in a uncomplicated method.

“Fantastic lighting is type to set a relaxing state of mind,” she includes. “A neutral color combination with natural products such as honed marble and bleached oak can likewise assist in developing a spa-inspired atmosphere.”

Eventually, the meaning is entirely approximately you. What brings you convenience and how you can make use of the area to supply advantages to you is what specifies the health spa design.

“A glamorous bath seems like a sanctuary after a chaotic day,” states Juneja. “Spa-like baths feel tidy, relatively transportive, and soothing.”

Spa-style restrooms are likewise an excellent method to include worth to your house.

Today, some typical patterns in spa-style restrooms consist of freestanding tubs, steam showers, radiant-heated floorings, and numerous showerheads. Anything that makes and brings a glamorous feel that master restroom suite feels more like a spa-like sanctuary somewhat of any standard restroom.

Juneja recommends a minimalist design, floor-to-ceiling tile, and using teak wood accents.

“This is a design that customers typically ask for when they are refurbishing their restrooms, and I believe that that’s a reflection of what’s occurring in new-home building and construction,” states Juneja. “Individuals gravitate towards the sanctuary-like feel of a day spa restroom.”

The High-End Budget Plan

When spending plan isn’t much of a factor to consider, there are many choices you will not understand what to do with. The very best strategy would be to deal with an interior decoration expert or your homebuilder’s style center to bring your dream to life.

Whatever the spending plan, the majority of home builders will be more than delighted to assist you in developing the restroom of your dreams.

Read More →


Easy House Updates in Phoenix Arizona City location that Look Pricey

You do not need to be a millionaire to offer your house a touch of high-end. There are a lot of simple house updates you can make without investing a fortune, and lots of cans take your home from good to high, if you understand what we indicate. Some updates can make a substantial distinction when it comes time to resell your house, too, bring in the attention of purchasers searching for homes that provide lots of bonus.

Here’s a peek at what some style pros think about the leading house updates that can make your house appearance– and feel– more glamorous in Phoenix Arizona City location.

Include Architectural Information 

Absolutely nothing identifies a space like beams along with the ceiling, crown molding, a chair rail, or wainscoting. All of these can be carried out rather cheaply, mainly if you come in handy sufficient to do a few of the labor yourself. Another easy concept: Combine a ceiling plate with a significant lighting fixture for an elegant mix of brand-new and old.

Change Your Hardware & Door Knobs

If you’re taking a 2nd appearance at your cooking area and bath hardware, think about blending metals, a leading house style pattern this year, which provides you complimentary license to match and blend. Altering those out can have a significant effect on making your house appearance polished.

Revitalize Your Outside Home Furnishings

From wind and rain to severe heat and cold, outdoor furnishings can look weathered faster than a Northeaster can blow through. Look for resilient materials in high-end designs (geometric if you’re a fan of flower or contemporary if you’re more standard).

Think About Changing To White Cabinets

The technique of getting it to look smooth is to utilize a spray weapon for a more even look. Go for high-gloss variations if your counters and backsplash are more on the dull side and they’ll look even more modern– and costly.

Re-Tile Little Areas

Glass tile looks costly and is very popular right now, making it much more comfortable than ever to discover a color and pattern you like without investing a fortune. Think about tiling your area in a herringbone pattern, a favorite of leading designers, for an even more refined appearance.

Include A Wall Installed Faucet Or A Variety Hood Over Your Stovetop

The fence installed tap makes filling pots with water simpler, so you no longer need to bring heavy pots from the sink to the range. Whether you choose slick steel or the appeal of rustic wood, variety hoods include a practical, architectural centerpiece that can be a genuine showstopper.

Arrange Your Utility Room And Kitchen

It’s challenging to keep these high-traffic areas clutter-free, however doing so will make a significant distinction in how they feel and look. Joanna Teplin and Clea Shearer, the creators of the House Edit, a Nashville-based company and style business, recommend eliminating as much product packaging as possible for the items you keep in these spaces, then organizing them according to work. Otherwise, you’ll be pulling out lots of bins and boxes every time you require something.

Follow The 10-20% Decluttering Guideline

While it goes without stating that stacks of kids and documents’ toys communicate the reverse of high-end, those aren’t the only things standing in the method of a clutter-free house. Lots of designers comply with the following guideline: Stroll into every space in your home and eliminate 10 to 20 percent of what exists, even if that suggests keeping away accent furnishings and additional pillows, then turning it out from time to time when you wish to alter the appearance of each space.

Raise Your Window Treatments

This is a design technique that offers the impression of taller ceilings, making space appear more significant and more extensive. Keep medications light-weight to make sure lots of natural light washes into space. The darker area, the dingier, and duller it will look.

Beautify Your Garden

It utilized to cost a fortune to light your garden, however thanks to more recent, low-voltage, low-cost systems, it’s simpler than ever to get the search for less. You can likewise refurbish the landscaping with a little water function or a garden course made from low-cost gravel and pavers.

Read More →


The lodging: which of these three types is suitable for your home?

The shelter is an important part of a sloping roof and determines its watertightness. It performs various functions. Today we distinguish three types of roofs: membranes, flexible panels and rigid panels.

The shelter is an important part of a sloping roof and determines its watertightness. It performs various functions. The most important thing: accidentally catching water, for example after a roof tile has been blown off or broken during stormy weather or after powder snow has blown in. It also makes a construction temporarily watertight as long as the final roof covering has not been installed. In cold weather, the shelter removes the condensation that forms at the bottom of the roof covering. It also protects the attic space against dust and directs water vapor from the inside to the outside. A shelter must therefore be vapor-permeable. Plastic roofing films, even those with micro-perforations (such as those used on a large scale in the 1970s and which are the cause of many roof damage), are therefore not suitable.

Membranes

Membranes based on synthetic materials are reinforced with synthetic fibers. They are waterproof and vapor-permeable. Advantages: easy and quick to install and affordable. A disadvantage is that the membrane can be pressed against the underside of the roof covering during the placement of the insulation.

Flexible panels

The synthetic panels, consisting of layers with an alveolar structure that have been perforated, are cheaper than the panels in fiber cement but do not guarantee the same quality. Fiber cement panels are made on the basis of a homogeneous cement mix, natural and synthetic fibers and mineral additives. They are vapor-permeable, waterproof and insensitive to mold. The cost price is considerably higher than that of membranes, which can be a disadvantage.

Rigid panels

These panels are made on the basis of sawing waste and wood fibers. They are waterproof and moisture-regulating. They cannot only act as a shelter: rigid panels can be 70 to 80 mm thick and provide additional insulation for the roof. Moreover, they offer (limited) protection against overheating. Because they form a thermal break at the level of the rafters, they also prevent construction nodes. A disadvantage is that the cost price is considerably higher than that of other shelter materials. They also make the roof thicker.

Air Conditioning Repair and Installation

Having the proper heating and cooling system installed is important for your comfort and for your energy bills. Contacting and using a qualified HVAC contractor for air conditioning installation is critical, as the wrong set up can cost you way more on your energy bill and may not cool your home or office properly.

Contact an air conditioning contractor that know their stuff.

King HVAC Contractors have 2 locations in Scottsdale AZ and Phoenix AZ

King HVAC Contractors

16427 N Scottsdale Rd #410H,

Scottsdale, AZ 85254

(480) 372-9865

Read More →


5 tips for access control at the front door and garage door

If you choose a new front door or garage door, you should not only base your looks on the looks or the energy performance. By also taking security and access control into account when purchasing, you win twice: you reduce the risk of burglary and you benefit from more user comfort. You are always in the right place with these five tips!

  1. European standard

There are more options than ever to equip your house quickly and cheaply with alarm systems and cameras. Yet physical security with burglar-proof doors and locks remains the absolute basis.

  1. Motorized lock

You can also integrate a motorized lock in the front door, linked to one or more forms of access control. Manufacturers unpack with touch screens that are integrated in the door and combine several functions, such as a videophone, a card reader, a finger scanner and a code keyboard.

  1. Remote control

An additional advantage of motorized locks is that manufacturers also develop all kinds of apps for this. Moreover, the classic videophone makes way for the connected variant. This way you can always check, from anywhere, whether the front door or entrance gate is closed properly, and if necessary, control the access remotely. Or use your smartphone as an access badge, so that the front door opens automatically when you are in the area.

  1. Digital security

As soon as you use connected devices, there is a risk that the code will be cracked. Theoretically, at least, because manufacturers invest heavily in encryption technology and digital locks. For the connection with your smartphone or tablet, these systems use your wireless WiFi network at home. Therefore, choose a meaningless name for your network, do not use an obvious Wi-Fi code and occasionally change your router’s administrator password. You can optionally disable the Wi-Fi Protected Setup (WPS) of your router.

  1. Prepare

Motorized door locks exist with both wiring and wireless. The wireless systems work with a battery integrated in the cylinder that you can recharge with a wired or wireless charger. If you are not sure yet, or you want to keep options open for the future, provide 220 volts at your front door during construction or renovation.

Read More →